Multifunctional electric medical bed knowledge popularization

medical adjustable bed 

The multifunctional electric medical bed is mainly used by hospital intensive care unit (ICU) and general ward patients for treatment, rescue, and transportation.

The multifunctional electric medical bed is composed of ABS bed heads, ABS lifting guardrails, bed boards, upper bed frames, lower bed frames, lifting linkages, electric linear actuators, controllers, hand control boards, universal wheels and other major components. 

Safety precautions

1. Before using the multifunctional electric medical bed, first check whether the power cord is firmly attached. The controller cable is reliable.

2. The linear actuator wire and power cord of the controller must not be placed between the lifting link and the upper and lower bed frames so as to prevent the wire from being cut off and causing personal equipment accidents.

3. After the backplane is raised, the patient is lying on the panel and is not allowed to push it.

4, people can not stand on the bed to jump, when the backplane rises, people sit on the backboard and stand on the bed panel, are not allowed to implement.

5. After the universal wheel is braked, it is not allowed to move or move. It can only be moved after releasing the brake.

6. It is not allowed to push horizontally so as not to damage the guardrail.

7, uneven road can not be implemented to prevent multi-function electric medical bed caster damage.

8. When using the controller, the buttons on the control panel can only be pressed one by one to complete the action. It is not allowed to operate the multifunctional electric medical bed by pressing more than two buttons at the same time so as to avoid misoperation and endanger the safety of the patient.

9. When the multifunctional electric medical bed needs to be moved, the power plug must be unplugged, and the power controller must be wire-wound so that it can be pushed.

10. When the multifunctional electric medical bed needs to be moved, the lifting guardrail should be lifted to prevent the patient from falling and being injured during the movement. When the electric bed moves, it must be operated by two people at the same time so as to avoid losing control of the direction during the implementation, resulting in structural damage and endangering the health of the patient.

Maintenance and precautions

1. When it is not in use, place the multifunctional electric medical bed at the lowest position. After the power cord controller is coiled, push it to a safe place and stop the caster.

2, regular inspections, check the controller line and the linear drive wire, plug is solid and reliable, whether the connection Luo bolt loose.

3, regular cleaning, use a neutral detergent to clean, after cleaning with a soft dry wipe, as for ventilation.

4, avoid using alkaline or other corrosive liquid cleaning.

5. During handling and use, collisions are strictly prohibited to prevent structural damage.

6, do not contact with strong acid, strong alkali to prevent corrosion, such as accidentally localized by strong acid, alkali corrosion or sticky dirt, did not remove the discoloration in time to produce stains, can be washed or soaked with water, then neutral The synthetic detergent was wiped with a damp cloth and wiped with a dry cloth.

7. If you need to repair or replace parts, please contact our company after-sales service department, do not disassemble.