Power socket installation seven steps how to arrange more beautiful

power strip, power socket 7 steps for installation! 

The power outlet is indispensable in our home life, and it is basically encountered in decoration and hydropower. The reasonable layout is not only beautiful, but also makes us more convenient and safe in life. So what steps are the outlets installed? More beautiful, then let's take a look!

Power socket installation seven steps :

1. The conductors on the socket need to use the cross-section of the copper wire. When wiring, the fire wire must enter the switch. The principle of the zero wire into the lamp head must be provided with a leakage protection device.

2, the general position of the socket is best not to be less than 1.8 meters, concealed if the ground can not be less than 0.3 meters, concealed, then draw a frame on the wall to dig pits, the depth and the thickness of the socket, the kitchen And the broadcast of the bathroom should be more than 1.5 meters, and the air conditioning should be more than 2 meters.

3, the bedroom headboard and other places to do more two-hole broadcast, the kitchen uses high-power electrical appliances, it is recommended to do more three-hole socket. And to use a separate socket to avoid overload, the three-hole socket must be grounded.

4, the need to conceal the proposed proposal to draw a frame, and then dig the hole by the frame line, the depth of the pit to be as thick as the socket.

5. Secure the bottom of the pit with a plastic plate, pass the three wires through the mounting box, and then fix the mounting box. 6. Pass through the insulation of the three wire heads of the mounting box to expose the copper wire. Separate the wires. Connect the socket base with the corresponding position.

6. After the three wires have been connected, the broadcast seat can be fixed in the mounting box.